Notice 3COM OfficeConnect ADSL Wireless 11g Firewall Router

Notice 3COM OfficeConnect ADSL Wireless 11g Firewall Router disponible gratuitement après inscription

Accédez à la notice du 3COM OfficeConnect ADSL Wireless 11g Firewall Router en adhérant à la communauté.

Notice d’utilisation de votre 3COM OfficeConnect ADSL Wireless 11g Firewall Router. La notice vous renseigne sur l’utilisation, donne des solutions aux problèmes d’entretien, de fonctionnement et d’assistance pour votre OfficeConnect ADSL Wireless 11g Firewall Router.

Notices - manuels - modes d'emploi disponibles pour 3COM OfficeConnect ADSL Wireless 11g Firewall Router après inscription au groupe d'entraide

Aperçu de la notice

Extrait de la notice

a wired and wireless NIC installed, you must ensure that only one NIC is used to communicate with the LAN. To use the wireless NIC, unplug the Ethernet cable, and then reboot your computer. 4.Launch your Web browser and attempt to browse to an Internet Web site such as www.3com.com. If you can successfully access this site, then your wireless computer and Router have been configured successfully. To improve the security of your wireless network, 3Com strongly recommends that you enable WPA2 or WPA encryption and that you change the SSID to something other than the default. Consult the online help or the User Guide for details. SSID is 3ComChannel 11 Encryption is off. SSID______________________________ Channel Number______________________________ Jerry2_QIG 17/3/06 10:01 am Page 9Problem Solving10 PROBLEM SOLVING If you are experiencing difficulties with your installation, try the following. •Ensure all networking equipment is switched on. The Router should be showing a green Power LED. If it is not, check the power adapter connection. Do not use any power adapter with your Router other than the one supplied. •Ensure that the computer is connected to the Router. The Router should be displaying a green LAN Status LED. If it is not, verify that the computer is connected to one of the Router’s LAN ports with an Ethernet cable. •Ensure that you do not have a Web proxy enabled on your computer. Go to the Control Paneland click on Internet Options. Click the Connectionstab, and then click the LAN Settingsbutton at the bottom. Make sure that the Use Proxy Serveroption is unchecked. •If you are unable to access the Router’s Web interface. Launch a Web browser, and then enter http://192.168.1.1. If you chose a different IP address, use t...

Produits 3COM les plus consultés

En cours...