Notice ACER aspire E360

Manuel ACER aspire E360 disponible gratuitement après inscription

Le groupe d'entraide ACER aspire E360 est ravi de partager cette notice avec vous

Notice d’utilisation de votre ACER aspire E360. La notice vous renseigne sur l’utilisation, donne des solutions aux problèmes d’entretien, de fonctionnement et d’assistance pour votre aspire E360.

Notices - manuels - modes d'emploi disponibles pour ACER aspire E360 après inscription au groupe d'entraide

600 K | Français
Aperçu de la notice

Extrait de la notice

Parallel port VGA port IEEE 1394 port LAN port USB ports Audio jacksEnglish 6 Computer front view Caution : Please insert the media cards upside down to avoid damaging your hardware. E seriesDescription 1Optical drive 2Eject button for optical drive 3Power button 4USB ports 5Speaker/ Headphone jack 6Microphone-in jack 7Indicators 8FDD drive 9Media card readers* 10IEEE 1394 portEnglish 7 Aspire E seriesEnglish 8 Installing new components Make sure you only use components that are compatible with your Aspire computer. Consult your dealer about the suitability of new components before you purchase them. To ensure correct installation, refer to the documentation that comes with your new components before you start to add or replace components. Possible upgrade options include the following: •Replace the HDD with a higher capacity model, or add a second HDD. •Install additional memory. •Install a graphics card as a substitute for the embedded graphics subsystem. •Replace the CD drive with a DVD or CD-RW drive. •Install an add-on card, such as a fax/modem card, in one of the empty PCI slots. Opening The Case Before you open the case, turn your computer off and unplug the power cord from the wall outlet. a) Gently lay down the computer on a flat surface to access the side panel of the unit. b) Push the case lock to the right and pull the side panel toward you to remove the side panel.English 9 Frequently asked questions The following questions are possible situations that may arise during the use of your computer and each is followed by easy answers and solutions to the situation. Q: I pressed the power switch but the system did not boot up. A: Check the LED located above the power switch. If the LED is no...

En cours...