Notice AEG EX 150 E

Notice AEG EX 150 E disponible gratuitement après inscription

Accédez à la notice du AEG EX 150 E en adhérant à la communauté.

Notice d’utilisation de votre AEG EX 150 E. La notice vous renseigne sur l’utilisation, donne des solutions aux problèmes d’entretien, de fonctionnement et d’assistance pour votre EX 150 E.

Notices - manuels - modes d'emploi disponibles pour AEG EX 150 E après inscription au groupe d'entraide

Aperçu de la notice

Extrait de la notice

als). Do not inhale the dust. Use a dust absorption system and wear a suitable dust protection mask. Remove deposited dust thoroughly, e.g. with a vacuum cleaner. Do not use machines on any material containing asbestos. This machine is suitable only for dry sanding. SPECIFIED CONDITIONS OF USE This random orbital sander is a versatile machine. The following work can be carried out with it: Coarse sanding and grinding, Fine sanding and polishing, Rubbing down weather-beaten paint, Polishing up scratches on acrylic glass, Etc. To provide the best adhesion, it is recommended that you clean the backing pad and the sanding disc backing occasionally by brushing them lightly with a small brush. Do not use this product in any other way as stated for normal use. MAINS CONNECTION Connect only to single-phase AC current and only to the system voltage indicated on the rating plate. It is also possible to connect to sockets without an earthing contact as the design conforms to safety class II. EC-DECLARATION OF CONFORMITY We declare under our sole responsibility that this product is in conformity with the following standards or standardized documents. EN 60745, EN 55014-1, EN 55014-2, EN 61000-3-2, EN 61000-3-3, in accordance with the regulations 98/37/EC, 2004/108/EC Rainer Kumpf Manager Product Development ADVICE FOR OPERATION Only use original AEG sanding and polishing tools with self-adhesive velcro fastening. MAINTENANCE The ventilation slots of the machine must be kept clear at all times. Use only AEG accessories and spare parts. Should components need to be replaced which have not been described, please contact one of our service agents (see our list of guarantee/service addresses). If needed, an exploded view of the tool can be ordered. Please state the...

En cours...