Notice ALCATEL Temporis 26 disponible gratuitement après inscription

Extrait de la notice

you. 6.1MODIFYING THE FLASH TIME Before you do anything else, disconnect the telephone line cable.
Remove the black label located under the phone. By default, the flash time is 300 ms.
To modify it, move the mini-switch with the tip of a ballpoint until it points to the flash time you want. 6.2MODIFYING THE TYPE OF DIALLING By default, your telephone uses voice frequency (TONE) dialling.
To switch it to pulse dialling, move the mini-switch with the tip of a ballpoint until it points to PULSE. FLASHTONE PULSE 100 ms 300 ms 600 ms 1.INSTALLING THE PHONE
Plug one end of the spiral cord into the handset and the other under the phone ().
Plug the telephone cable into the connector located under the phone and plug the telephone jack into the wall socket (). 2.WALLMOUNTING Extract the tab located on the top of the phone base, just under the cradle switch, from its housing (small plastic part), then reinsert it upside down. Place the cable in the slot underneath the base. Drill two horizontal holes 70 mm apart. Insert two wall plugs then screw in wood screws (diameter: 3 mm, length: 25 mm) without tightening them. Hang the phone on the screws. 3.GENERALUSE The TEMPORIS 16 and TEMPORIS 26telephones are designed to transmit and receive telephone calls and be connected to public and private telephone networks. To clean your phone, use a lightly moistened antistatic cloth. You can choose between two ways of dialling: -dialling after lifting the handset, -dialling in on-hook mode. 3.1DIALLING IN ON-HOOK MODE*
Press , then dial your correspondent's number.
Pick up the handset to set up the conversation. 3.2HANDS-FREE KEY* During a call, press so that the people near you can take part in the conversation.
Adjust the volume with the s...