Notice ALPATEC BY TAURUS DH 8 S disponible gratuitement après inscription

Extrait de la notice

dity rate. 40% ?50% ?60% ?Continuous ?40% The appliance will stop working when the air reaches the desired humidity rate. For example: if 40% is set, when the room reaches 40%RH humidity rate, the appliance will switch off. LOUVER’S ORIENTATION: - Press Oscillation touch (11), wing will change to 45° opened, light indicator lights on. - Press again Oscillation touch, wing will be opened to 90° (indicator switch off). TIMER: - Press Timer touch (10) to set timer desired. 1h ?2 h ?4 h ?8 h ?Off - The appliance will stop when selected time is done.13 IONIZER: - Press Ionizer touch (9) to activate ionizer function (LED lights on). - By generating negative ions, the ionizer function allows to restore air electric balance and gives a well-being sensation. - Press again Ionizer touch to stop ionizer function (LED switch off). WATER TANK FULL - When the water tank is full, the appliance stops working, the water full light indicator (15) lights on and the appliance will emit some bips. - Switch off the appliance. - Take out and empty the water tank. Put it back. - Switch on the appliance. CONTINUOUS DRAINAGE- Water drain hose non included: provide yourself a hoseØ int.: 8 mm andØ ext.: 10 mm If you use the appliance in a very high humidity level, it may be more convenient to use continuous drainage. - Switch off and unplug the appliance. - Remove the water tank, connect a water drain hose to the water outlet Water outlet14 - Put the water tank back by passing the hose through the drain hose opening. - Place a receptacle to collect water at the end of this hose. Caution : keep a positive slope to evacuate water. Note : In very cold weather, make sure the water tube will not freeze. CLEANING - Switch off and unplug the appliance. - Use a soft...