Notice ALPATEC BY TAURUS PR 3 MBE 1500

Notice ALPATEC BY TAURUS PR 3 MBE 1500 disponible gratuitement après inscription

Accédez à la notice du ALPATEC BY TAURUS PR 3 MBE 1500 en adhérant à la communauté.

Notice d’utilisation de votre ALPATEC BY TAURUS PR 3 MBE 1500. La notice vous renseigne sur l’utilisation, donne des solutions aux problèmes d’entretien, de fonctionnement et d’assistance pour votre PR 3 MBE 1500.

Notices - manuels - modes d'emploi disponibles pour ALPATEC BY TAURUS PR 3 MBE 1500 après inscription au groupe d'entraide

Aperçu de la notice

Extrait de la notice

HIGH POWERLOW POWER PR3MBE 15001500 W1000 W PR3MBE 20002000 W1300 W OPERAOPERATING INSTRUCTIONTING INSTRUCTION PLUG THE APPLIANCE. Turn the power switch to 1 position , as sound can be heard. WITH REMOTE CONTROL OR CONTROL PANEL : - Press MODE touch. The appliance starts in LOW mode (Its power is 1000 W for PR3MBE 1500 and 1300 W for PR3MBE 2000), the timer is set on 4 hours. To modify selected time, press + or – touch ( from 1 hour to 16 hours). If you select 0h, the appliance stops automatically a few seconds later. LOW 22°C TIME4H 9 notice PR3MBE 28/03/07 15:58 Page 9- To select HIGH mode, press again MODE touch. The timer is set on 4 hours. To modify selected time, press + or – touch ( from 1 hour to 16 hours). If you select 0h, the appliance stops automatically a few seconds later. HIGH 22°C TIME4H - To select AUTO mode, press again MODE touch. Set desired temperature by pressing + or – touch. To use timer, press TIMER touch. Set desired time by pressing + or – touch. If you select 0h, the appliance stops automatically a few seconds later. To cancel timer function, press MODE touch until reselect AUTO mode. AUTO 22°C7°C - To stop the appliance, press ARRET touch. If you did not use the appliance for a long time, turn the power switch to 0 position and unplug the appliance. TIMERTIMER SETTING OF THE TIME OF START Press MODE button and choose the operating mode. Press down buttons MODE and TIMER simultaneously for few seconds. Then the heater stops working and displays the time of start. Press + and – buttons to set the time: from 1h to 8h. When it reaches the set time of start, the heater will automatically be restored to the operating mode set and starts to heat. TIME8H TO CANCEL TIMER Press MODE button, and the appli...

En cours...