Notice ALTEC LANSING ADA 890 disponible gratuitement après inscription

Extrait de la notice

d Stereo/Surround Sound Operation (See Figures 3 and 4) If it is desired to convert to a 3-speaker system, follow the instructions and the pictorial view below. 1)Separate the left and right surround speakers from their stands by gently pulling the speaker up (See Figure 3). 2)Remove the left (WHITE) and right (PURPLE) speaker wires from the subwoofer. (Set speaker stands aside for future use) 3)Remove the supplied rubber plugs from the top of the satellite speakers. 4)Mount the surround speakers on top of the satellite speakers as shown in Figure 3. Be sure to line up tabs on the satellite and surround speakers. Gently push down on the satellite speaker to fit into place. (The connections to the satellite speakers are made automatically once the surround speakers are mounted) Your ADA890 system is now ready for use. Placement of Speakers (See Figures 5 and 6) All stereo information is heard from the satellite and surround speakers. The subwoofer contains no stereo information and its sound is non-directional. As a result, the subwoofer does not necessarily have to be placed in any particular relationship to the satellites. Placing the subwoofer on the floor close to a wall or corner of a room provides maximum bass efficiency. The subwoofer is not magnetically shielded and should not be placed near video displays. * NearField (3 Piece) The satellite speakers are magnetically shielded and can be placed close to the computer monitor without distorting video images. Best stereo effects are obtained by placing the speakers as far apart as is practical. Enhanced Surround Sound (5 Piece) Best surround effects are obtained by placing the rear surround speakers slightly behind the user and approximately the same distance apart as the front satellite spe...