Notice AMANA NFW7200TW disponible gratuitement après inscription

Extrait de la notice

k light will go out. DC68-02030B-01 MAH-3 12/15/05 3:11 PM Page 8 Any cycle can be delayed for up to 9 hours in one hour increments.7 SELECTCYCLEOPTIONS, CONT. Press the appropriate pad(s) to select one or more options.The indicator light above the pad will illuminate when the option is selected. Extra Rinse–Adds an additional rinse at the end of the cycle to more thoroughly remove laundry additives and perfumes. Rinse and Spin–Use for loads that need rinsing only or to add rinse-added fabric softener to a load. Spin Only–Provides a spin to remove more water from the load. Step 6 To start the washer,press theCycle Selectordial.Before the washer starts to fill, it will make a series of clicking noises to check the door lock and do a quick drain. Changing a Cycle If an incorrect cycle has been accidentally selected: 1.Press the Cycle Selectordial. 2.Turn the Cycle Selectordial to the desired cycle. 3.Set the desired options for the cycle. 4.Press the Cycle Selectordial.The Wash indicator lights stop flashing and the new cycle starts. Canceling a Cycle To cancel a cycle: 1.Press the Power Offpad. 2.Select the Rinse and Spinor SpinOnlyoption pad. 3.Press the Cycle Selectordial.The Spin light illuminates and the washer starts the rinse or spin. STARTTHEWASHER USINGTHECONTROLS DC68-02030B-01 MAH-3 12/15/05 3:11 PM Page 9WATERUSE After setting the cycle and pressing Cycle Selector dial,the display will show the estimated minutes remaining in the cycle.The estimated time remaining may fluctuate to better indicate the wash time left in the cycle. Door Lock–lights whenever the door of the clothes washer is locked.The door can be unlocked by pressing the Cycle Selector dial to pause the washer. Control Lock–The washer controls can be loc...