Notice AMARINA KBS-8900 disponible gratuitement après inscription

Extrait de la notice

t for recycle HARWARE INSTALLATION Connect the USB plug of the receiver on the USB port of your computer. Put the receiver on your desk, so you can establish the link between keyboard and mouse. Install the batteries in the keyboard. Turn off the computer Remove the battery cover on the bottom of the keyboard. Insert two AA batteries type AA 1.5V LR6 as shown inside the battery compartment. Replace the cover. Wait 5 seconds Insert 2 AAA 1.2v NI-MH batteries in the compartment as shown inside the battery compartment. Replace the cover. Install the batteries in the mouse Synchronise the channels You have to link the channels at each battery replacement 1) Press the “connect” button on the stand (The green led will blink quickly) 2) Press the “ID” button UNDERNEAT the keyboard (the green LED will blink slower) 3) Press the « Connect » button on the stand (the green led will blink quickly) 4) Press the button UNDER the mouse 5) Press the « Connect » button of the stand (the green led will blink slower) The keyboard and the mouse are ready for use. Test the mouse and the keyboard. If they are ready for use, go to the next step, otherwise redo chapter 5. (The led of the base will blink at each time you use the keyboard or move the mouse) Wait 5 seconds Wait 5 seconds Insert the CD driver into the CD drive In order to use all the functions of the keyboard and the mouse, you must install the functions indicated on the CD. SOFTW...