Notice APRILIA Enjoy Racing disponible gratuitement après inscription

Extrait de la notice

se accompanies or follows any shift, try mov- ing the GRIPSHIFT slightly. If the noise persists or grows louder, stop the bicycle and try to locate the noise. If necessary,ask your aprilia dealer to identify and correct any problems. A) Function switch B) Rear derailleur grip shift C) Brake lever MAIN COMPONENTS A B C20use and maintenanceEnjoy Racing - Enjoy City Cleaning and lubrication of the chain Keep the chain as free of dirt as possible. After cleaning with a chain cleaning set,allow the chain to air dry and then apply the proper bicycle oil. Keep in mind that excessive oil on the chain will attract more dirt. Carefully apply oil only to the pivot points of each link. Cleaning of the freewheel The freewheel should be kept as clean as possible. Remove the surface dirt that gathers around the cog with solvent and a brush. Do not use gasoline. To clean and lubricate the bearings, remove the freewheel unit from the hub. Adjustment Check that the derailleurs have been properly adjusted if: -shifting is sluggish or difficult -you hear a rubbing or grinding noise -the chain rubs on any part of the bicycle or falls off during or after a shift. The rear derailleur (Figure 5) should be checked and adjusted by your aprilia dealer first. Removal of spoke protector may cause technical troubles. Apply to an Authorized aprilia Service Center. Figure 5. Rear Derailleur21use and maintenanceEnjoy Racing - Enjoy City WHEEL Inspect your wheels frequently to make sure that there are no loose,damaged,or broken spokes. Remember:If a wheel is not in good condition, both the range, the effectiveness of the brakes and the strength of the wheel are greatly reduced. Tire Inspection Keep your tires inflated to the pressure molded on the tire sidewal...