Notice ASROCK 775i65G disponible gratuitement après inscription

Extrait de la notice

are marked with black lines. Step 2-2.Orient the CPU with IHS (Integrated Heat Sink) up. Locate Pin1 and the two orientation key notches. For proper inserting, please ensure to match the two orientation key notches of the CPU with the two alignment keys of the socket. Step 2-3.Carefully place the CPU into the socket by using a purely vertical motion. Step 2-4.Verify that the CPU is within the socket and properly mated to the orient keys. Step 3.Remove PnP Cap (Pick and Place Cap): Use your left hand index finger and thumb to support the load plate edge, engage PnP cap with right hand thumb and peel the cap from the socket while pressing on center of PnP cap to assist in removal. black line black line 775-Pin Socket Pin1 alignment keyalignment key Pin1 orientation key notch orientation key notch 775-LAND CPU EnglishEnglish EnglishEnglish EnglishASRock 775i65G Motherboard1010101010 EnglishEnglish EnglishEnglish English 1. It is recommended to use the cap tab to handle and avoid kicking off the PnP cap. 2. This cap must be placed if returning the motherboard for after service. Step 4.Close the socket: Step 4-1.Rotate the load plate onto the IHS. Step 4-2.While pressing down lightly on load plate, engage the load lever. Step 4-3.Secure load lever with load plate tab under retention tab of load lever. 2.22.22.22.22.2Installation of CPU Fan and HeatsinkInstallation of CPU Fan and HeatsinkInstallation of CPU Fan and HeatsinkInstallation of CPU Fan and HeatsinkInstallation of CPU Fan and Heatsink For proper installation, please kindly refer to the instruction manuals of your CPU fan and heatsink. Below is an example to illustrate the installation of the heatsink for 775-LAND CPU. Step 1.Apply thermal interface mate...