Notice ASROCK P4i65G disponible gratuitement après inscription

Extrait de la notice

d chip-type) memory modules in the DDR DIMM slots to activate Dual Channel Memory Technology. Otherwise, it will operate at single channel mode. If you install only one memory module or two non-identical memory modules, it is unable to activate the Dual Channel Memory Technology. Installing a DIMMInstalling a DIMMInstalling a DIMMInstalling a DIMMInstalling a DIMM Please make sure to disconnect power supply before adding or removing DIMMs or the system components. Step 1.Unlock a DIMM slot by pressing the retaining clips outward. Step 2.Align a DIMM on the slot such that the notch on the DIMM matches the break on the slot. The DIMM only fits in one correct orientation. It will cause permanent damage to the motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation. Step 3.Firmly insert the DIMM into the slot until the retaining clips at both ends fully snap back in place and the DIMM is properly seated.ASRock P4i65G Motherboard1010101010 EnglishEnglish EnglishEnglish English 2.3 Expansion Slots (PCI,AGP and AMR Slots)2.3 Expansion Slots (PCI,AGP and AMR Slots)2.3 Expansion Slots (PCI,AGP and AMR Slots)2.3 Expansion Slots (PCI,AGP and AMR Slots)2.3 Expansion Slots (PCI,AGP and AMR Slots) There are 3 PCI slots, 1 AGP slot, and 1 AMR slot on this motherboard. PCI slots:The PCI slots are used to install expansion cards that have the 32-bit PCI interface. AGP slot:The AGP slot is used to install a graphics card. The ASRock AGP slot has a special design of clasp that can securely fasten the inserted graphics card. Do NOT use a 3.3V AGP card on the AGP slot of this motherboard! It may cause permanent damage! AMR slot:AMR slot is used to insert an ASRock MR card (optional) with v.92 Modem functionality. Installing an e...