Notice BIONAIRE BAP9240 disponible gratuitement après inscription

Extrait de la notice

rate. • Decreased air ? ow. ? Check to make sure the unit is plugged in. ? Check to make sure the unit is on by pressing the power button. ? Make sure the ? lters are properly installed and ? rmly close the door. ? If the ? lters have not been changed for six months or more, change the HEPA-type ? lters. ? Check to ensure nothing is blocking the air inlet and ? ltered air outlet. FOR U.K. AND IRELAND ONLY If the plug is not suitable for the socket outlets in your home, it can be removed and replaced by a plug of the correct type. Please refer to “Installation of a plug” below. Installation of a plug applicable to U.K. and Ireland only NOTE: If the terminals in the plug are not marked or if you are unsure or in doubt about the installation of the plug please contact a quali? ed electrician. If a 13A 3-pin plug is ? tted, it must be an ASTA approved plug, conforming to BS1363 standard. Replacement 3A fuses must be BSI or ASTA BS1362 approved. This product is ? tted with a 13A plug complying to BS1363. If this plug is unsuitable or needs to be replaced, please note the following: The wires in the mains lead are coloured as such: BROWN - LIVE BLUE - NEUTRAL Please note that the colour of these mains wires may not correspond with the colour markings that identify the terminals in your plug. Please proceed as follows: The BROWN coloured wire must be connected to the terminal, which is marked with the letter “L” or is coloured RED. The BLUE coloured wire must be connected to the terminal, which is marked with the letter “N” or is coloured BLACK. DO NOT CONNECT either of these wires to the earth terminal in the plug. The earth terminal plug is marked with the letter “E”, or with...