Notice BIONAIRE BAP9424 disponible gratuitement après inscription

Extrait de la notice

l. 7. The ? lter service indicator light should be reset once the ? lters have been replaced. Reset by pressing down 3 seconds on the ? lter reset button (I). REPLACEMENT FILTERS BAPF30B HEPA-type ? lter (usage 2 pcs). BAPF300 True HEPA ? lter (usage 2 pcs.) -- Helps remove up to 99.97% of airborne particles as small as 0.3 microns, including tobacco smoke. UK - Filter Sales Order Line - 0870 759 9000 TROUBLESHOOTING ProblemSolution • Unit will not operate. • Decreased air ? ow. ? Check to make sure the unit is plugged in. ? Check to make sure the unit is on by pressing the power button. ? Make sure the ? lters are properly installed and ? rmly close the door. ? If the ? lters have not been changed for 6 months or more, change the HEPA-Type ? lters. ? Check to ensure nothing is blocking the air inlet and ? ltered air outlet. FOR U.K. AND IRELAND ONLY If the plug is not suitable for the socket outlets in your home, it can be removed and replaced by a plug of the correct type. Please refer to “Installation of a plug” below. Installation of a plug applicable to U.K. and Ireland only NOTE: If the terminals in the plug are not marked or if you are unsure or in doubt about the installation of the plug please contact a quali? ed electrician. If a 13A 3-pin plug is ? tted, it must be an ASTA approved plug, conforming to BS1363 standard. Replacement 3A fuses must be BSI or ASTA BS1362 approved. This product is ? tted with a 13A plug complying to BS1363. If this plug is unsuitable or needs to be replaced, please note the following: The wires in the mains lead are coloured as such: BROWN - LIVE BLUE - NEUTRAL Please note that the colour of these mains wires may not co...