Notice BIONAIRE BFH410-I

Notice BIONAIRE BFH410-I disponible gratuitement après inscription

Accédez à la notice du BIONAIRE BFH410-I en adhérant à la communauté.

Notice d’utilisation de votre BIONAIRE BFH410-I. La notice vous renseigne sur l’utilisation, donne des solutions aux problèmes d’entretien, de fonctionnement et d’assistance pour votre BFH410-I.

Notices - manuels - modes d'emploi disponibles pour BIONAIRE BFH410-I après inscription au groupe d'entraide

Aperçu de la notice

Extrait de la notice

m1 above. USING THE TIMER AccuTempTMProgrammable Timer (For BFH410 only) Accutemp™ allows the user to programme the heater to come ON at a preset time OR switch OFF after a selected period. Setting the ON timer 1.If the heater is on, press the mode button for 2 seconds to switch the heater off. 2.While the heater is off, hold down both the (+) and (-) buttons together to select timer. The display will flash and a red dot will flash on the right hand side of the digital display. 3.Using either the (+) or (-) buttons, programme the heater to switch on up to 16 hours later, in increments of 1 hour. Example - 4 hours. 4.After the preset length of time the heater will automatically turn on to “Auto-Hi-24°C” for a period of 2 hours. 3 Example - Switch ON The time is 1 pm. You require the heater to switch on at 5 pm therefore: Set the ON time at 4 hours. Example - Switch OFF The time is 1 pm. The heater is running and you require the heater to switch off at 10 pm therefore:Set the time at 9 hours. 4 BFH400-410I07MLM1.qxd:BFH400/410I07MLM1.qxd 7/12/07 4:23 PM Page 3B. Commande de mode C. Thermostat D. Témoin de mise sous tension E. Poignée de transport F. Support BFH410 (Fig. 2) A. Bouton Mode B. Affichage numérique C. Boutons de réglage de température D. Grille frontale E. Poignée de transport F. Support CONSIGNES IMPORTANTES •Avant de brancher le radiateur, s’assurer que la tension indiquée sur la plaque signalétique correspond à la tension secteur de l’habitat ou du bureau. •Prière de lire ces instructions attentivement, en combinaison avec les illustrations avant d’employer le radiateur. •Ne pas utiliser de rallonge car cela risquerait de provoquer la surchauffe du radiateur. •En cas de détérioration du cordon ou de la...

En cours...