Notice BRAUN 7891WD disponible gratuitement après inscription

Extrait de la notice

ly for 8 seconds and then the appliance turns off automatically. In this case, turn the switch back to the position «0» and let the appliance cool down. Keeping the appliance in top shape Cleaning with water After each wet usage, thoroughly clean the appliance with water to ensure optimum performance. Remove the Smoothing cap (2) and clean it under warm running water. Hold the appliance with the epilation head under running water and briefly switch it on. Then press the release button (10) to remove the epilation head. Thoroughly shake both, the epilation head and the appliance to make sure that remaining water can drip out. Remove the non-slip grip and leave all parts to dry. Before reattaching, make sure all parts are completely dry. After reassembling the epilation head and the Smoothing cap (2), you may attach the protection cap (1) to protect the blade. Cleaning with the brush If you have used the appliance in dry conditions, it may be sufficient to clean it with the brush. Thoroughly clean the tweezers from the rear side of the Epilation head with the brush dipped into alcohol. While doing so, turn the tweezer element manually. This cleaning method ensures best hygienic conditions for the epilation head. 99903889_SE_7891_MEA_S6-28.indd 999903889_SE_7891_MEA_S6-28.indd 928.04.11 14:0828.04.11 14:0810 Replacing the Smoothing cap The Smoothing cap (2) is provided with a lubrastrip (2b). It turns white over time, which acts as an indicator when the blade is becoming dull. This indicates that it is time to change the Smoothing cap. As the lubrastrip is water soluble the Smoothing cap should be stored in a dry environment and should never be left in the sink, face down. To...