Notice BST PR 100 disponible gratuitement après inscription

Extrait de la notice

ressure: -If your cartridge has a detachable stylus protection, remove it and be careful not to touch the stylus tip. -Release the arm clamp and lift the tone arm from the arm rest. -Turn counterweight clockwise or counter- clockwise until the tone arm is balanced horizontally as floating freely. During adjusting the horizontal zero (0) balance, be careful that the stylus tip does not contact the turntable mat or turntable base. -After the tone arm is horizontally zero (0) balanced temporaly, place the tone arm on the arm rest and lock it with the arm clamp. -While rotating the stylus-pressure ring, hold the counterweight steady with one hand until “0”on the ring aligns with center line on the tone arm rear shaft. Now the adjustment of the horizontal zero (0) balance should be completed. -After adjusting the horizontal zero (0), turn the balanced counterweight counter-clockwise to get the proper stylus pressure as the cartridge manufacturer’s recommendation when it meets center line on the tone arm rear shaft. WARRANTY CONDITIONS BST equipment is covered by a 1-year warranty on parts and labour except for Crossfaders (90 days). The following rules apply from the day the equipment leaves the factory: The date on the invoice is considered to be the date the warranty begins. Only companies approved by BST are allowed to work on the equipment. Warranty becomes void when other service technicians open the equipment. During warranty period, defective equipment must be sent by pre- paid mail in the original box. BST will return the goods by pre-paid mail during the first year of warranty; thereafter the mailing cost is to be paid by the recipient Potentiometers have a limited lifetime and are not covered by the manufacturer for...