old products, you are making an important contribution to the protection of our environment. This electronic device is RoHS compliant. That means it does not use a number of materials (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) and polybrominated diphenyl ethers (PBDE)) that may generate highly polluting and hazardous waste during recycling process. Installation Best way to install The chassis of your CARAT C57 is very heavily built and therefore it is not exposed to vibrations. However, it should be placed on a non-vibrating furniture to get the best performances out of it. We therefore recommend to place it in or on a speci? c audio furniture. Free space around the device This device will become warm while in use. Therefore a free space of minimum 5 cm (2 inches) on the top of the product is required to allow a suitable cooling air ? ow. DO NEVER OBSTRUCT THE OPENINGS UNDER THE DEVICE. Do not place it close to any source of heat, and do not expose it to sun rays, in order to keep temperature at a normal level. Do not use it on a soft surface (bed, blanket, couch, pillow or any other surface of that type), this could obstruct the openings under the device and prevent from a proper ventilation. Ambient temperature while in use: Ambient temperature while in use: Ambient temperature 2° C to 35° C 36° F to 95° F SAFETY INSTRUCTIONS This product is made according to strict rules for safety standards. All operating and use instructions should be followed as described below. Check the voltage selector before connecting the power cable. This device was developed and designed to be used in different countries. Please make sure that the voltage selector on the rear panel of t...