Notice CASTORAMA WAP-238EC disponible gratuitement après inscription

Extrait de la notice

clogged -The capacity of the air conditioner is not suitable for the conditions or size of the room -The evaporator is frozen -The compressor blocking device has been loosen or the copper pipe is getting in touch with the body of the set -The set temperature is too close to the room's temperature -There is something blocking the suction vent on the back of condenser -The fan on the condenser is blocked -There is a power failure -The plug is not connected -The timer is unable to work -The main switch has not been pressed -Close the window -Remove/switch off the source of heat -Decrease the set temperature -Clean the filter -Clean the air filter -Change the purifier filter, if necessary -Do not make the appliance operating at too low temperature(below22 -Provide repairment -Wait for the power return -Connect the plug -Provide repairment -Press the main switch -Turn off the appliance remove the plug and contact the service center4 Operation NAME OF THE PARTSNAME OF THE PARTS Easy operation Power Control The power control turns the unit on and off. Warning Light Condensed water may accumulate in the unit. If the internal tank becomes full, the Warning Light will shine and the unit will not operate until the unit has been drained. Mode Control The Mode Control has three settings: Cool Dehumidify Fan The settings are adjusted with Mode Control button. A light will indicate which setting is currently being used. Cooling Mode When cool mode is selected, the indicator light will shine green. During the cooling mode the air is cooled and hod a...