Notice DORO Neobio 25R disponible gratuitement après inscription

Extrait de la notice

esired answer function. See TAM Settings. 1. Press . Scroll to ANS. MACHINE. Press OK. 2. Scroll to TAM SETTINGS. Press OK. 3. Scroll to OGM SETTINGS. Press OK. 4. Scroll to ANSWER & REC/ANSWER ONLY. Press OK. 5. Scroll to RECORD MESS. Press OK. 6. After the long beep you can record your message (speaking 20 cm from the keypad). Press OK. 7. The message will be played back to you. Repeat the above to change. A pre-recorded message is used until you make your own recording, and that message can also be restored if required.. To restore this, press C (right menu button) during playback of outgoing message. Screening Incoming messages will be heard on the loudspeaker of the base unit as they are received. If nothing can be heard, check that the volume is turned up and that the function has been activated – see separate description Answer machine settings. You can also press OK on the handset while recording is in progress. The call can be intercepted by pressing q or lifting the receiver of another telephone connected to the same line.7 English Use of answer machine (base unit) The number in the base units’ display will ?ash when there are new messages. and the numbers on the base unit will ?ash when there are new messages. Press 9 (base unit) to start playback. Command Function 88 / 99 ........Prev msg/Skip forward. ¦ ....................Stop playback. X ...................Delete current message. VOL + / - ........To increase/decrease the volume. Delete all old messages After playback: Hold down X until you hear a beep. Use of answer machine (handset) New messages are indicated by ?ashing in the display in standby mode. Playback always starts with new messages. 1. Press . Scroll to ANS. MACHINE. Press OK. 2. Scroll to MSG PLAYBACK. Pr...