Notice DURACRAFT AMD 50 E disponible gratuitement après inscription

Extrait de la notice

temperature to between 16 °C and 32 °C. The chosen temperature appears on the LED display (22). Press the key “FAN“ (19) to set the fan-speed – “HIGH“– “MED“ – “LOW“. The corresponding control light (20) comes on. Make sure that the exhaust-air tube (11) is mounted according to the instructions in the section on „Mounting the exhaust-air tube“, and that it leads to outdoors. When you switch this operating mode off, wait for at least 3 minutes before switching this mode back on again, as otherwise the compressor could be damaged. Operating mode (DRY) In this mode the air-conditioners runs at a preset speed which cannot be adjusted. The temperature cannot be selected on the control panel (1). Keep doors and win- dows closed to enable the best dehumidification performance. Do not lead the exhaust-air tube to outdoors. When you switch this operating mode off, wait for at least 3 minutes before switching this mode back on, as otherwise the compressor could be damaged. Operating mode (FAN) Press the “FAN“ (19) key to set the fan-speed “HIGH“ – “MED“ – “LOW“. The corresponding control light (20) comes on. „F” appears on the LED display (22). The temperature cannot be selected. Do not lead the exhaust-air tube (11) to outdoors. 6. Timer function The timer function allows you to choose the time at which the air-conditioner is to switch on or off automatically (between 1 and 24 hours). The set time is not real time, but represents the period of time that is to elapse before the unit switches itself on or off automatically. The functions can only be programmed separately. The timer control light (25) comes on. The air-conditioner is switched off: Press the key “TIMER ON/OFF“ (24). Press the keys “UP“ () (higher) or “DOWN“ () (lower) (21), to program...