Notice Danby DDW497W disponible gratuitement après inscription

Extrait de la notice

ressurized. •To relieve water pressure from inside the inlet hose, (make sure the water line (faucet) is closed):press and hold the red pressure relief button on the quick connect until the flow of water stops. WARNING FAILURE TO RELIEVE WATER PRESSURE,BEFORE DISCONNECTING THE QUICK-CONNECT FROM THE FAUCET,WILL RESULT IN BACK-PRESSURE OVER-SPRAY.THE TEMPERATURE OF INCOMING WATER CAN BE VERY HOT,AND BACK-PRESSURE OVER-SPRAY COULD CAUSE SEVERE BURNS AND/OR SCALDING. DANGER DO NOT LET CHILDREN DISCONNECT THE DISH- WASHER;CLOSE SUPERVISION OF CHILDREN IS ALWAYS IMPORTANT AROUND APPLIANCES. Disconnecting your Dishwasher 5 Loading your Dishwasher Preparing your Dishes for Washing Using the Right DetergentThat depends if your water is ‘hard’or ‘soft’: Hard water requires more detergent to get dishes clean;soft water requires less. •The recessed detergent area located on the inside door panel will hold approximately 20 grams of detergent. You can help prevent unsightly spots on dishes and glassware and reduce drying time by using a rinse agent.A rinse agent is specially formulated to rinse away food and detergent residues that can be left behind on your dishes.Used regularly, a rinse agent will automatically provide you with cleaner dishes every time you wash. •To fill the rinse agent dispenser:unscrew the dispenser cap located on the inner door.Add the rinse agent slowly into the container until it just reaches the bottom of the filling cap inside the dispenser opening.Replace the cap.The dispenser automatically releases the rinse agent into the final rinse water at the end of the wash cycle.The dispenser holds approximately 125 ml (4.2 fl.oz.) of rinse agent. The Pre-wash is a convenience program that allows dishes to b...