Notice Danby DPAC7099

Notice Danby DPAC7099 disponible gratuitement après inscription

Accédez à la notice du Danby DPAC7099 en adhérant à la communauté.

Notice d’utilisation de votre Danby DPAC7099. La notice vous renseigne sur l’utilisation, donne des solutions aux problèmes d’entretien, de fonctionnement et d’assistance pour votre DPAC7099.

Notices - manuels - modes d'emploi disponibles pour Danby DPAC7099 après inscription au groupe d'entraide

Aperçu de la notice

Extrait de la notice

ures of the Control Panel7 Power Control The Power Control turns the unit on and off Mode Control The Mode Control has 4 settings:• Cool •Dehumidify • Fan • AutoThe settings are adjusted by the Mode Control button • Cooling Mode During the cooling mode the air is cooled and hot air is exhaustedoutside through the exhaust tube. Adjust fan speed and temperature to suit your desired comfort level. Note:The air exchange hoses must vent outside the room whenusing Cool Mode. • Dehumidify Mode Air is dehumidified as it passes through the air conditioner, withoutbeing in full cooling mode. If room temperature is higher than 25°C(77°F), fan speed can be adjusted; otherwise fan speed is fixed tolow. Note:If the unit is to be used as a dehumidifier,do not connect the exhaust hose to vent outside. When using as a dehumidifier, continuous drainage is necessary. • Fan Mode Air is circulated throughout the room with nocooling. Note:Unit does not need to be vented in FanMode. • Auto Mode In Auto Mode the unit swill switch its mode andfan speed automatically based on the ambienttemperature. Fan Speed Control The Fan Speed Control has 4 settings:• Auto (Cooling only) • High • Medium • Low Temp. Set Controls & The temperature can be set by means of the and buttons on the remote control. The temperature can be set between 16°C(61°F)and 32°C (89°F), and pressing the and buttons will cause the set temperature to remainin the display panel for approximately 5 seconds. The display will then revert back toshowing the current room temperature.Note:It is only possible to set the temperaturewhen in Cooling Mode. The temperature cannotbe set when in Auto, Dehumidify, or Fan mode. Fahrenheit/Celsius Selector Pressing this button will switch the displaybetween degrees Celsius and degreesF...

Produits Danby les plus consultés

En cours...