Notice EUROFLEX IS 50 HS disponible gratuitement après inscription

Extrait de la notice

s on. After prolonged use, the appliance and the cap may be very hot. If the machine is hot there is the risk of burns, since the water which is poured in may cause hot splashes. Before adding water: 1. Use the ON/OFF switch to turn off the appliance and plug off the electrical plug of the electrical outlet socket. 2. Wait a few minutes so that the temperature of the water in the boiler decreases. 3. Carefully unscrew the safety cap and let the remaining steam vent out slowly. 4. Pour in water. 5. Tighten the safety cap ?rmly. 6. Put the electrical plug back into the electrical outlet socket. 7. Switch the appliance back on with the ON/OFF switch and wait a few minutes. 6. Vertical ironing 1. Set the temperature gauge at the MAX position, and regulate the thumb wheel placed on the back of the iron at the maximum. 2. Place the garment on a coat-hanger and stretch the part to be ironed with your hand. 3. Press the steam control button intermittently and pass the iron over the garment starting at the top then moving to the bottom. HELPFUL TIPS: Keep the iron from touching fabrics to prevent them from burning. 7. Maintenance of your Steam Generator - Before carrying out any maintenance, unplug the appliance from the electrical outlet, and ensure that the soleplate and the iron protection shell are cool. - Do not clean the iron and the boiler with household cleaners or discaling agents. - Do not place the iron and the boiler under the tap jet. - Place the iron on the non-slip heat-proof pad, never on metal surfaces. - Empty the tank after each use. - We recommend you clean the soleplate with speci?c products, do not use abrasive or corrosive products and do not rub the soleplate to avoid scratching. - Clean the plas...