Notice GEMINI CFX-20 disponible gratuitement après inscription

Extrait de la notice

disconnecting the power cord from an AC outlet, always grasp it by the plug. Never pull the power cord. 5. To prevent electric shock, do not remove the cover or the bottom screws. There are no user serviceable parts inside. Please refer servicing to a qual- ified technician. 6. Do not use chemical solvents to clean the unit. 7. Keep this manual in a safe place for future reference. 8. In the USA ~ if you experience problems with this unit call G EMINI CUSTOMERSERVICEat: 1 (732) 738-9003 or visit HTTP://WWW.GEMINIDJ.COM/SUP- PORT.HTML. Do not attempt to return this equipment to your dealer. LINE VOLTAGE SELECTION: Model iCFX & CFX-20are dual voltage units. It will operate at 115 Vor 230 V. To set the proper voltage, follow these steps: 1. Place the head of a screwdriver in the groove of the V OLTAGE SELECTORSWITCH(1) found on the rear panel. 2. Flip the switch to 115 Vor 230 V. 3. Do not force or twist the switch. Excessive force may cause damage. If the switch does not move smoothly, contact a qualified technician. CONNECTIONS: 1. Before making any connections, please make sure the P OWER SWITCH(4) is in the OFFposition. All connections are located on the rear panel of the CD player. Please refer to the diagram of this model on page 3. 2. Included with your iCFX orCFX-20is a P OWER CORD (2). Plug one end of the power cord in to the AC IN(3). Plug the other end in to the nearest available power output. 3. Plug one end of a set of RCAcable connectors into the RCA O UTLET(5). 4. Plug the other end of the RCAconnectors into any available line level input jacks on your mixer. If you are playing the iCFX orCFX-20through a receiver, you can plug the RCAconnectors into the CD or AUX input jacks on your receiver. If there are no CD or AUX...