Notice INFOSEC 500 XP disponible gratuitement après inscription

Extrait de la notice

tests before calling the Hot Line. Check list: • Is the main switch in the “ON” position? • Is the UPS plugged into the mains power supply? • Does the power supply fall within specified unit values? • Has the fuse gone in the mains plug? • Is the UPS overloaded? • Is the battery flat or defective? INFOSEC UPS SYSTEM - 4, rue de la Rigotière – 44700 Orvault – FRANCE - www.infosec.fr Hot Line: tel : + 33 (0)2 40 76 15 82 - fax : + 33 (0)2 40 94 29 51 - hotline@infosec.fr – 10 06 04 206 12 9 SYMPTOM POSSIBLE CAUSE SOLUTIONS 1. Battery missing. 1. Charge battery up to 8 hours. 2. Faulty battery. 2. Replace with the same type of battery. No LED display on the front panel. 3. Power switch was not pressed for at least 5 seconds. 3. Press and hold power switch for at least 5 seconds. Alarm buzzer beeps every ½ second when AC supply is normal. 1. UPS overload. 1. Verify that the load matches the UPS capability stipulated in the specifications. 1. UPS overload or the connected equipment is defective. 1. Remove some non-critical load. 2. Flat battery. 2. Recharge the battery by plugging the UPS in for 24 hours. In the event of power failure, reduced backup time. 3. Battery defect due to high temperature operation environment, or improper operation to battery. 3. Replace with the same type of battery. 1. Blown fuse. 1. Replace the same type of fuse. 2. Power cord is loose. 2. Reconnect the power cord properly. Mains normal but LED is flashing and beeping. 3. No mains power supply or UPS is not on. 3. Check the power supply INFOSEC UPS SYSTEM - 4, rue de la Rigotière – 44700 Orvault – FRANCE - www.infosec.fr Hot Line: tel : + 33 (0)2 40 76 1...