Notice JABRA GN9120 Flex disponible gratuitement après inscription

Extrait de la notice

To overcome this problem, move the base at least 30 cm/12” away from the phone. If you have a European version, you can instead choose to set the headset to Low Power mode. The person on the other end of the line says he/she cannot hear me. Ensure that the Telephone Termination Switch is in the correct position and that you have adjusted the Transmit Power. Please refer to the relevant section in the reference guide. When I press the MFB the GN1000 lifts but the call is not connected. When using your GN9120/GN9125 with a GN1000, make sure that the base is connected to the telephone’s handset port and not the headset port. Please refer to the illustrations in the GN1000 Quick Guide. My headset echoes. Make sure your telephone’s volume control is set to a mid position or lower. If necessary, adjust your microphone volume on the headset to a lower setting I have a GN9120/GN9125, the version with built-in Electronic Hook Switch, but it doesn’t work with my telephone Please make sure that the GN9120/GN9125 is compatible with your telephone system, and set the GN9120/GN9125 in the correct mode. For standard telephones and for use with GN1000, please make sure to put the GN9120/GN9125 in RHL mode. My headset was working but now it has stopped, no indicators are lit. Your headset may need pairing to the base. Refer to page 7 “Registering a new master headset” in this reference guide. Please visit www.jabra.com for further information and frequently asked questions.7 6. Recon?guration Replacing the battery The battery supplied with your GN headset will function for many years. When it needs to be replaced, please proceed as follows: 1. Remove the earhook/headband. 2. Unscrew the small plate, that holds the battery in place, and remove bat...