be done at your local (or the nearest) service center DAILY CHECK Brake System -Check for smooth functioning and sensitivity of response Tires -Check for cracks or other damage -Ensure no abnormal abrasion -Check for depth of tire carving Engine -Adequate engine oil -Check for unusual noises Check for appropriate acceleration / deceleration response Here we introduce some simple ways of checking and adjusting your motorcycle BRAKES Disc Brake Checking Check from the back of the brake fixture. If the discs appear heavily abraded, replace the two discs with new ones Brake Oil Replenishment If brake oil level is below minimum, replenish with brake oil DOT3 or DOT4 Pinch rear brake handle till resistance increases and measure if the further stroke is in the stated range Adjust the stroke by turning the regulating nut to the right to increase the travel distance or to the left to decrease same CAUTION Do not use inferior quality brake oil Prevent brake oil from cohering on the paintwork to avoid fading or chapping CATION: Be sure to keep the foveae of the adjusting nut in perfect contact with the pillar surface of the pin ADVICE: Check the travel distance of the grip again after adjustment Squeeze the brake grip tightly to check if the displacement of the indicating line falls within the indicated brake limit ENGINE Oil Checking Oil level 1 Open the seat cushoin 2 Remve oil cap. Oil should bebetween maximum and minimum levels 3 Add specified oil if requiredcheck oil level periodically. CAUTION: Use of non-standard or low quality engine oil may damage the engine Use main supp...