sprinkler lid safety Never fit the blade unit to your machine without the jar fitted. Never unscrew the jar while the multi-mill is fitted to your machine. Don’t touch the sharp blades. Keep the blade unit away from children. Never remove the multi-mill until the blades have completely stopped. important To ensure long life of your mill, never run for longer than 30 seconds. Switch off as soon as you’ve got the right consistency. Don’t process spices - they may damage the plastic. The machine won’t work if the mill is fitted incorrectly. Use for dry ingredients only. to use your mill 1Put your ingredients into the jar. Fill it no more than half full. 2Fit the sealing ring into the blade unit. 3Turn the blade unit upside down. Lower it into the jar, blades down. 4Screw the blade unit onto the jar until it is finger tight. 5Remove the liquidiser outlet cover by turning in an anti clockwise direction. 6Place the mill on the liquidiser outlet and turn to lock in a clockwise direction . 7Switch on to maximum speed or use the pulse control. 8After milling, you can replace the blade unit with the sprinkler lid and shake out your food. The sprinkler lid is not airtight. hints Herbs are best milled when clean and dry. KENSTORE™ attachments carousel Your food processor is supplied with an attachment storage carousel that fits inside the bowl. to use the storage carousel 1Fit the knife blade to the bowl. 2Then fit the whisk, discs and canopy into the carousel . 3Fit the carousel over the knife blade and place the processor lid on top 4 lcare & cleaning Always switch off and unplug before cleaning. Handle the blades and cutting discs with care - they are extremely sharp. Some foods may discolour the pl...