Notice KLIPSCH RoomGroove disponible gratuitement après inscription

Extrait de la notice

from 5 to 9 and change all KlipschCast components to that home code. KlipschCast components will only transmit and receive audio from components on the same home code. Once the home code has been changed, you must disconnect and reconnect the power cord from the wall outlet for the change to be made. This will change the home code and allow the component to talk to other KlipschCast components set to the same home code. Setting the Home Code Transmitting Audio from the CS-700 In a multi-room system incorporating a CS-700 cinema system (sold separately), the RoomGroove remote can be used to directly select sources from the CS-700 once the CS-700 has been selected by the RoomGroove’s “Listen” button. The CS-700 will default to transmit its local source (the source selected for listening/viewing on the CS-700 system) until another source is selected. See the “Remote Control” section of this manual for details on the remote’s functionality. Note: All devices in the wireless multi-room system must be set to the same home code in order for transmissions to take place.3Buttons Power Press to turn the RoomGroove “On”. Press again to put the RoomGroove into “Standby” mode. RoomGroove iPod Selects the iPod docked in the local RoomGroove. Aux Selects the audio device connected to the local RoomGroove (the audio device must be playing to be heard). Listen Toggles through available sources both local and wireless. Cinema System Sources CD/DVD Accesses the CD/DVD drive of the cinema system connected to the KlipschCast network. AM/FM Accesses the AM/FM tuner of the cinema system connected to the KlipschCast network. Cab/Sat Accesses audio from the device connected to the cinema system’s Cab/Sat input co...