actual data shown will be different based on your local settings and conditions. Radio-controlled timeWWVB Reception Indicator Date Display Comfort Icon Indoor Temperature Humidity Display Air Pressure Trend Indicator Forecast Icon Barometric Air Pressure 12-hour Air Pressure History Outdoor Temperature Display Remote Sensor Number (Up to 3 Total) IV.Function Key Layout A.The below picture shows the four function keys used in program- ming and operation of your indoor weather station V.Program Mode The program mode is laid out in a manner that allows you to program each function separately, or you can follow the instructions entirely to program the Wireless Weather Station. Complete programming is usually done for the initial set-up, and will require you to skip step 1,2 and 3 of each programming section. The programming mode can be exited at any time by either pressing the “CH” button, or waiting for the 15-second time-out to take effect. A.Overview of programming mode sequence B.LCD Contrast Setting 1.Press and hold the “SET” button for five seconds. 2.“lcd” will appear at the top of the display and a number will flash next to it. 3.Press and release the “OUT/+” button to select the desired LCD contrast setting. 4.Press and release the “SET” button to confirm the LCD contrast setting and continue to the Time Zone setting. 1.LCD Contrast2.Time Zone3.DST ON/OFF 4.Radio-controlled5.12/24-hour6.Hour Time ON/OFF time mode 7.Minute8.Year9.Month 10.Date11.°F/°C12.inHg/hPa 13.Relative pressure setting14.Forecast sensitivityGBGBP.11P.10 C.Time Zone Setting 1.Press and hold the “SET” button for five seconds. 2.“lcd” will appear at the top of the display and a number will flash next to it. 3.Press and release the “SET” button...