Notice LEXIBOOK ST100 disponible gratuitement après inscription

Extrait de la notice

elected or no button was pressed for more than 30 seconds, programming stops automatically, the LED goes off and the last MACRO settings will be stored. Deleting the settings 1. To delete the MACRO key settings, press and hold the SET button and press the respective MACRO key. 2. When the LED lights up, release the two buttons. 3. Press the MACRO key again. Any control command previously stored is now deleted. Noting the programmed code Always write down the 3-digit code for your remote control after running the search and saving the code. This may be useful if you need to reprogram your remote control in the event of accidental cancellation or when you change used batteries. When searching the code, the LED will ?ash corresponding to the numerals of the 3-digit code. For example: For code 231, the LED would ?ash two times, then three times, then once. To ?nd the code for your remote control: 1. Press a device key. Simultaneously press and hold the SET button and 1. Release the 2 buttons. The LED lights up; its ?ashing indicates the ?rst digit of the code. If the LED does not turn on: digit = 0. 2. To display the second digit, press and hold the SET button and 2 simultaneously. The LED starts ?ashing. 3. To display the third digit, press and hold the SET and 3 simultaneously. The LED starts ?ashing. 4. Repeat steps 1-4 to ?nd the codes of the other devices. VCR2 CodeSAT CodeCBL CodeAMP Code TV1 Code TV2 Code DVD CodeCD Code AUX Code VCR1 Code ST100.indd 64/9/07 18:05:17Copyright © Lexibook 2007 7 ENGLISH Environmental Protection Unwanted electrical appliances can be recycled and should not be discarded along with regular household waste! Please actively support the conservation of resources and help protect the env...