f the ice. • When defrosting or leaving the unit off, prop and leave the door open at least tow inches. This allows air to dry the inside of the cabinet, reducing the chance for mildew. 9 II. Complementary instructions • During transportation, the incline angle of the cabinet should not be over 45°. • Don’t turn the ice maker upside down. Compressor and sealed system problems can occur. • The ice maker should be placed on a horizontal properly levelled surface. • To ensure proper ventilation for your ice maker allow for 15 cm space at the top, back and on each side of the ice maker. • Before using the ice maker for the first time, please wait 2 hours after positioning it in a proper place. • Clean the inner liner, ice collecting tray, water box, ice shovel and evaporator frequently. III. Parts description and illustration of unit 1) Inner liner 2) Water reservoir 3) Ice storage basket 4) Ice bin full sensor 5) Ice shovel 6) Water tray 7) Evaporator 8) Water inlet tube 9) Water drain plug 10) Compressor 11) Water pump 12) Power cord 13) Lid 14) Control board 15) Window 10 IV. Features and benefits The ice maker is different from traditional commercial ice maker. Its unique design and portability with complement you rec. Room, cottage, RV, boat, office of wherever you need already supply of ice. It is micro computerized and maker ice fast and easy. Through each cycle, the ice maker completes the following steps: • Water filling • Ice making • Water releasing • Ice dropping • Ice transfer • Ice storage It is reliable and voice will alert you that ice is ready or that the water reservoir os empty an...