Notice MINEA WP5A disponible gratuitement après inscription

Extrait de la notice

the soiled surface of dishes. The water is pumped trough a rotating spray arm, drained through a filter removing food and soiled particles and pumped back through the spray arm. 2. Connection of the dishwasher Your dishwasher is delivered with 2 pipes: arrival and drainage of water. A tap of water arrival must be installed before connecting the dishwasher. Screw the water inlet connection to the back of the dishwasher. Screw the other end of the connector of arrival of water to the water tap. Screw the drain hose connector to the back of the dishwasher. Place the other end of the drain hose connector in the flue. Open the water tap slowly and check that there is no water leakage. The height minimum to install your dishwasher between two pieces of furniture is 43.8 cm. You ensure that a source of power corresponds to the length of the cord of food: 1.80 M. The dishwasher must be installed on a solid and plane surface. 9 If leaks are located, immediately shut the water supply and check the hose connections fully. 3. Before washing Scrape off solid food particles from the dishes. Remove excessive quantities of oil or grease. Empty any liquids from glasses and cups. Note: Dishes with dried-on foods are more difficult to wash and may not come clean in a normal wash cycle. Your dishwasher is not a crusher; remove the food surpluses before loading the dish rack. 4. Loading your dishwasher Your dishwasher is designed to receive a standard “4 pieces” plate setting. The maximum diameter of the plates is 25 cm. 5. Detergent Use only detergent specifically made for use in dishwasher, liquids or powder. Hard water requires more detergent to get dishes clean. Soft wa...