Notice NAD C425

Notice NAD C425 disponible gratuitement après inscription

Accédez à la notice du NAD C425 en adhérant à la communauté.

Notice d’utilisation de votre NAD C425. La notice vous renseigne sur l’utilisation, donne des solutions aux problèmes d’entretien, de fonctionnement et d’assistance pour votre C425.

Notices - manuels - modes d'emploi disponibles pour NAD C425 après inscription au groupe d'entraide

Aperçu de la notice

Extrait de la notice

Insert the bare antenna wires into the two terminal holes and push the connector keys upwards again to secure the connection (see figure 3). Test various positions for the antenna but always ensure the loop is placed vertically for best reception. Placing the antenna close to large metal items such as metal shelves or radiators may interfere with reception. 3Output -Using twin RCA-to-RCA leads, connect to the left (white) and right (red) audio outputs to the "Tuner" input or other line-level input such as "Aux" input of your amplifier. Do not connect this cable to the amplifier’s "Phono" input. 4IR in -The IR IN connector is used to pass commands from other units fitted with IR OUT connectors. This allows centralized control of a complete system, and also allows some of the basic functions of other NAD components (such as a CD player or cassette-deck) also equipped with IR IN to be controlled with an NAD system remote control. To function with such other units, connect the C 425’s IR IN to the IR OUT on the other unit. IR IN connectors can be daisy- chained, IN to OUT, so that a whole system can be controlled from the remote control facilities of one unit. NOTE The NAD C 425 has a built-in receiver for commands from a remote control and doesn’t need to rely on IR IN to be remotely operated. It is advisable not to connect IR IN if the other units that have their own built-in remote control command receiver and are positioned together, in direct view from the remote control handset. If you are unsure, try operating the products without IR IN first; if the unit responds to the remote control command, it will not be necessary to connect IR IN. 5+12V Trigger in -This input allows the C 425 to be switched remotely to Stand-by and On by ancillary...

En cours...