rgoesfrom hightolow(no12Vpresent).Theunitwillnotgoto standbymodeusinganybuttononfrontpanelandremote control.Whentheexternalpowerisfirstappliedtotheunit, theunitwillgotothestatusdirectedbyTriggerinputwhen theswitchissettoAUTO. NOTEONINSTALLATION 5. +12V TRIGGER IN 6. +12V TRIGGER SWITCH Install the NAD C 542 Compact Disc player on a level, vibration- free surface. (Severe vibration, or operation in a tilted position, may cause the player to mis-track.) The player may be stacked with other stereo components, as long as there is adequate ventilation around it. If the player is placed in close proximity to a radio tuner (AM or FM), a VCR, or a television set, the operation of its digital circuits may produce static that would interfere with reception of weak broadcast signals. If this occurs, move the CD player away from other devices or switch it off when viewing or listening to broadcasts. Connect a twin RCA-to-RCA lead from the L (left) and R (right) Line Output jacks to the corresponding CD inputs on your amplifier. Plug in the AC power cord. Press the green POWER button to turn on the player. Press OPEN to open the disc drawer. Place a CD, label side up, in the tray’s circular recess. Be certain that the disc is centred within the recess. Press PLAY/PAUSE. The drawer closes automatically, and the disc begins to play. At any time you may press SKIP or to select different tracks on the disc. Press PLAY/PAUSE if you want to stop play temporarily while keeping the pickup at its current position on the disc. Press PLAY/PAUSE again when you want to resume playback. Press STOP if you want to end play and reset the pickup to the beginning of the disc. 1. 2. 3. 4. 5. 6. 7. 8.5 GB 3. DISPLAY The display provides information abo...