Notice NEW POL XD800 disponible gratuitement après inscription

Extrait de la notice

special dishwasher salt. 8 9 LA2505-092 LA2505-096 Only use rinse aids for dishwashers. Other products won’t obtain the desired effect. The rinse aid container S is located on the inside of the door. •Remove the container cap T by turning it _ revo- lution anticlockwise. •Fill container with rinse aid up to the broken line. Maximum quantity: about 140 ml. •Put the cap back in its place. •Clean off possible residues of rinse aid with a cloth, otherwise too much foam might be pro- duced during the rinsing process. Indication of rinse aid level More rinse aid needs to be added when the indicator (located on the container F) is clear (). When the container is full, the indicator has a dark coloration. S T F1234567890 1234567890 1234567890 1234567890 1234567890 1234567890 1234567890GB8 LA2505-094 Regulation of rinse aid dosage The regulation R of the quantity of rinse aid that is released can be found in the refill opening of the rinse aid container. It can be adjusted with a screwdriver. The possible settings range from 1 to 4. 1 corresponds to a release of one ml of rinse aid, 4 to four ml, etc. The appliance has been set on 2 (two ml) by the manufacturer. A full rinse aid container is sufficient for about 50 wash cycles. The quantity of rinse aid to be released should be adjusted when the result of the wash process is not satisfactory. •Always wipe off with a cloth any rinse aid that spilled over from the container. It is important to check the level of rinse aid in the container periodically – if possible every 31 wash cycles. Adding the detergent IMPORTANT! Do not use detergents in this dishwasher that are made for dish washing by hand! These substances produce large quantities of foam but they do not clean the dis...