Notice NIKON AF-S DX Nikkor 18-105 VR disponible gratuitement après inscription

Extrait de la notice

g the lens1Turn the camera off.2Remove the rear lens cap (Fig. D).3Align the mounting index 9 on the lens with the mounting mark on the camera, and rotate the lens counterclockwise until it clicks into place. Be sure that the lens is in the correct position when the mounting index 9 is on the top of the lens.4Remove the front lens cap (Fig. C). Removing the lens Turn the camera off before removing the lens. Press and hold the lens-release button on the camera while turning the lens clockwise. Using the Lens Hood HB-32 1 Attaching the hood Align the lens hood attachment index (, either of two indexes) 2 on the hood with the lens hood mounting index 4 on the lens, and turn the hood 1 counterclockwise (as viewed when holding the camera 15 Jp En De Fr Es Se Ru Nl It Ck Ch Kr with the lens facing away from you) until it clicks into place (Fig. B). Be sure that the lens hood mounting index is aligned with the lens hood setting index () 3. If the lens hood is not correctly attached, vignetting may occur. To facilitate attachment or removal of the hood, hold it by the base (near the lens hood attachment index) rather than its outer edge. Detaching the hood Hold the lens hood by the base (near the lens hood attachment index) and turn clockwise, as viewed when holding the camera with the lens facing away from you, to detach. Focusing, zooming, and depth of field Before focusing, rotate the zoom ring 5 to adjust the focal length until the desired composition is framed. If your camera has a depth-of- field preview (stop-down) button or lever, depth of field can be previewed through the camera viewfinder. For more information, refer to your camera's User's Manual. •This lens is equipped with the Internal Foc...