rts outwards so that the motor top is released. Lift up the motor top. Remove the sack ? lter from the cleaner. 2b) Disconnect the hose from the inlet by pressing the button on the hose connection downwards. Then pull out the hose. 2c) Empty by tilting the container backwards and pour the liquids into a ? oor drain or similar. Wipe the ? oat valve and ? oat basket with a damp cloth before the motor top is reinstalled to the container. 2d) Wipe the float valve and the float basket with a damp cloth. 2e) Put back the sack ? lter and the motor top to the container. Secure with the latches.Emptying: GWD 350 GWD 375 2f) Drain hose: GWD 375 have a draining hose. Detach the drain hose from the bracket by pulling hose backwards from the cleaner. Place the drain hose end near a ? oor drain and then remove the plug at hose end. The natural pressure will then drain the liquids from the container. 2g) Emptying from the container: Pull the upper parts of the latches outwards and release the motor top. Remove the motor top. Then remove the sack ? lter. The suction hose can be attached during emptying from the container. Grasp with one hand at the handle at the lower part of the container. To avoid movement of the trolley - place one foot at the basepart of the trolley. Then tilt the container backwards and pour the liquids into a ? oor drain or similar. 2h) Wipe the float valve and the float basket with a damp cloth. 2i) Put back the motor top to the container. Make sure that the switch/ switches is located in direction towards the suction inlet. Secure with the latches.3 Emptying after dry pick-up Remove the plug from the socket before emptying after dry pick- up. Check the ? lters and dustbag regularly. Release the latches by pulli...