Notice NOLAN N20 Visor disponible gratuitement après inscription

Extrait de la notice

ned properly. •VISOR: -If the visor is damaged or deeply scratched causing reduced visibility, this means that the protective treatment is probably damaged so the visor is to be replaced. -Do not paint nor apply stickers. -The visor can be used only for the intended helmet model. • MAINTENANCE AND CLEANING -Damage resulting from accidental fall may not be visible; helmets, which received violent impacts, are to be replaced. -Attention:Helmet and visor may be seriously damaged by some common substances without the damage being however visible. Use only lukewarm water and mild soap to clean helmet and visor, and then let them dry at room temperature away from sunrays and/or heat sources. -Attention:Never use petrol, thinner, benzene, solvents nor other chemicals which may: •Irreparably damage the helmet •Modify optical properties, reduce mechanical ones and weaken the visor protective treatment. Fig. A 7 ENGLISHINSTRUCTIONS FOR USE •VISOR 1Visor disassembly (only for versions with visor) 1.1Close the visor and remove the side plate from the helmet by pulling the rear end outwards (Fig. 1). 1.2Push the visor mechanism slider forwards as shown by the arrow (Fig. 2). 1.3Lift the rear area of the visor from the shell until it is completely released from the mechanism; slightly push it towards the front of the helmet (Fig. 3). 1.4Repeat all the operations on the other side as well. 2Visor assembly 2.1Place the visor on the shell taking care to align the teeth seat with the front part of the mechanism; hook the visor under the mechanism by pressing it against the helmet in the teeth area and simultaneously pushing it towards the rear part of the helmet so as to completely hook it to the mechanism (Fig. 4). 2.2Move the slider backwards until y...