he units need to be interconnected by MIDI cables plugged into the IN and OUT of each unit respectively. Activating this will cause the second unit to align itself to the first unit. The first unit can also be a drum machine or other MIDI Device. 33/45 – This sets the default normal speed of the platter to either 33RPM or 45RPM depending upon your desired use. When set to Default, the music will be normal at 0% no matter the platter speed. If the 33/44 button is toggled, then the speed of the music and platter will change accordingly for effect. Buffer - This gives an option for eliminating the dead space at the end of tracks. The unit already automatically removes dead space at the beginning of tracks. End-of-track dead space elimination is useful if you are playing a CD continuously and want to eliminate all the gaps between songs. Utility – o Sleep Mode - The unit will automatically enter sleep mode after 15 minutes of inactivity. In this mode, playback will still start instantly from buffer, however, the laser will be off to extend its life. If this feature is undesirable, then it can be turned off. o Remote Type (Fader, On/On, On/Off) – allows you to set the unit to remotely start via a fader-start mixer or switch. Fader - allows you to use an industry-standard fader-start mixer by attaching an 1/8” fader-start cable between the unit and your mixer. Typically, if you move the crossfader toward the active channel, the attached CD player will play. When it is moved awa,y the unit will Cue or Pause, depending upon the CD player setting. Some mixers allow the input channel also to start the player. On/On - allows you to use a momentary-type switch to start the unit. On/Off – allows you to use a locking sw...