2Turn the power switch so that ON is aligned with the white line. •The monitor turns on. 3To turn the power off, turn the power switch so that OFF is aligned with the white line. •The monitor also turns off. Mode dial Power switch basic_e_p_6.fm Page 16 Thursday, September 12, 2002 8:26 PMEn17 En SELECTING A LANGUAGE 1Set the mode dial to and turn the camera on. •Be sure to remove the lens cap before you turn the camera on. •You can select the language in all modes. 2Press . •The top menu is displayed. 3Press on the arrow pad to select MODE MENU. 4Press to select the SETUP tab, then press . 5Press to select , then press . 6Press to select a language, then press . 7Press again to exit the menu. 8To turn the camera off, set the power switch to OFF. SETTING THE DATE AND TIME 1Set the mode dial to and turn the camera on. •Be sure to remove the lens cap before you turn the camera on. •You can set the date and time in all modes. 2Press . •The top menu is displayed. 3Press on the arrow pad to select MODE MENU. 4Press to select the SETUP tab, then press 5Press to select , then press . •The green frame moves to the selected item. 6Press to select one of the following date formats: Y- M-D (Year/Month/Day), M-D-Y (Month/Day/Year), D-M-Y (Day/Month/Year). Then press . •Move to the year setting. •The following steps show the procedure used when the date and time settings are set to Y-M-D. basic_e_p_6.fm Page 17 Thursday, September 12, 2002 8:26 PM18En En 7Press to set the year, then press to move to the month setting. •To move back to the previous setting, press . The first two digits of the year are fixed. 8Repeat this procedure until the date and time are completely set. 9Press . •For a more accurate setting,...