learned function. To access the shifted function, press M (MAGIC) and then the key you have learned on. To delete a learned function: 1Press and hold downthe M (MAGIC) keyuntil the red LED underne- ath the POWER key blinks twice (the red LED will blink once then twice). 2Press 9 7 6 (the red LED underneath the POWER key will blink twice). 3 Press the device key in which the function will be deleted. 4 Press twice on the learned key which will be deleted(the red LED underneath the POWER key will blink twice).* 5 If there is another key which you wish to delete, repeat steps 1-4. 6 The original functions of the ONE FOR ALL 5 will now be present. * To delete a Shifted Learned feature, press M (MAGIC) before you press “the learned key to be deleted” (during step 4). To delete all learned functions within a specific mode: 1Press and hold downthe M (MAGIC) key until the red LED underne- ath the POWER key blinks twice (the red LED will blink once then twice). 2 Press 9 7 6(the red LED will blink twice). 3 Press the appropriate device (mode). Operational Reset The Operational Reset will erase all learned functions across all modes and some other programmed functions like Key Magic and Macros. 1 Press and hold downthe M (MAGIC) key until the red LED underneath the POWER key blinks twice (the red LED will blink once then twice). 2 Press 9 8 0(the red LED will blink four times). WWW.ONEFORALL.COM9It is possible to change the mode of any device key. This is useful if you want to set up two of the same devices on the ONE FOR ALL 5. The code can be set up using “Direct code set up” (pag. 5) or “Search method” (pag. 6). To change a device key, see the three examples below. Example 1)if you want to program a second TV on the VCR key. Example 2)if you...