le from the motherboard. 2. Press the latch to unlock the switch/LED housing. Fig. 11: Removing the switch/LED assembly 3. Gently pull away the cable and the switch/LED assembly from the chassis. Note When reassembling the switch/LED assembly, take care that it is put back in its original position, i.e. with the switch at the top and the LEDs at the bottom. iMedia Disassembly Manual - 7 Removing the Motherboard To remove the motherboard, first open the chassis (see section Opening the Chassis) and continue as follows: 1. Disconnect all cables connected to the motherboard. 2. Remove all add-on cards from their slots (see Removing Add-On Cards). 3. Remove the memory modules and the CPU (refer to the motherboard documentation for instructions on how to remove these components). 4. Remove the screws that hold the motherboard in place. 5. Carefully take the motherboard out of the chassis. Fig. 12: Removing the motherboard Removing the Power Supply Unit To remove the power supply unit, first open the chassis (see section Opening the Chassis), then follow the steps below: 1. Lay the chassis down on one side. 2. Disconnect the power supply from all peripherals and the motherboard. 3. Remove the screws at the back of the chassis. Fig. 13: Removing the power supply unit 4. Carefully lift the power supply out of the chassis. iMedia Disassembly Manual - 8...