Notice PHILIPS HI 995 Mastervapor Excel PRO disponible gratuitement après inscription

Extrait de la notice

surface on which it is standing. This is a normal phenomenon. Amicrocomputer controls the pump which automatically transfers small quantities of water from the water tank into the steam tank. This is a normal phenomenon. Some parts of the iron have been greased lightly in the factory. The temperature dial (K) has been set to a temperature which is too low for steam ironing. The steam tank is placed on an unstable and/or uneven surface. When you start steam ironing the supply hose is too cold. Steam condenses in the hose, causing droplets of water to escape from the soleplate. What do to Do not fill the water tank beyond the MAX indication and insert it carefully. Fill the water tank with water. Check if the water tank is in the correct position. Then press the tank firmly downwards until it is properly seated (fig. 4). Switch the iron off, unplug it and refill the water tank to the maximum level before you start steam-ironing. Move the appliance or place it on a different surface. Nothing. Nothing. After a short while this phenomenon will cease. Select the required ironing temperature as indicated in these instructions and the table. Put the steam tank on a stable and even surface. Before you continue steam- ironing, hold the iron over an old cloth or over the floor and press the steam activator (I) until the steam production has normalised. 9 Situation You do not see steam coming out of the soleplate. The appliance produces no steam, Turbo steam or Jet-of- steam The soleplate is dirty. Likely cause Superheated (i.e. high quality!) steam is hardly visible, especially when the temperature dial is set to maximum position, and even less so when the ambient temperature is relatively high. Pilot light *is on....