Notice PHILIPS SRU-5170

Notice PHILIPS SRU-5170 disponible gratuitement après inscription

Accédez à la notice du PHILIPS SRU-5170 en adhérant à la communauté.

Notice d’utilisation de votre PHILIPS SRU-5170. La notice vous renseigne sur l’utilisation, donne des solutions aux problèmes d’entretien, de fonctionnement et d’assistance pour votre SRU-5170.

Notices - manuels - modes d'emploi disponibles pour PHILIPS SRU-5170 après inscription au groupe d'entraide

Aperçu de la notice

Extrait de la notice

vice mode has been deleted. Learning key functions If you miss certain functions from your original remote control on the SRU 5170,it can learn these functions from the original remote control.You can store a function under any of the available keys on the SRU 5170,except XTRA(LEARN) and SELECT(SETUP). Any function already stored under a key will be deleted. 1Make sure you have the original remote control at hand. 2Use SELECT to select the desired device.E.g.DVD. 3Place both remote controls on a flat surface (like a coffee table) and aim them head-to-head with about 5 - 10 cm in between. 4Keep LEARNand the key you wish to learn on the SRU 5170 pressed simultaneously for 3 seconds, until ‘’lights up,together with ’LEARNING’. 5Press the key you wish to copy on the original remote control. –lights up.The remote control is now learning the function. –When the remote control has learned the function,the display shows ’LEARN OK’ to confirm that the signal is stored. –If the display shows ‘ERROR‘ or ‘MEM FULL’,start again from step 1. Also see ‘Troubleshooting’under 6.‘Support’. 9 English Instructions for use Manual_SRU5170_86 24-04-2007 15:48 Pagina 9Activating / de-activating the backlight function The backlight illuminates the display so you can clearly see all display messages,even in a dimly lit room.As the backlight consumes additional power,the battery lifetime will reduce when the backlight is used frequently.Therefore it is possible to de-activate the backlight function. De-activating the backlight function •Keep digit keys 1and 9pressed simultaneously for three seconds. –The backlight function is now de-activated and the backlight cannot be turned on. Activating the backlight function •Keep digit keys 7and 9pressed simultane...

En cours...