Notice PIONEER PRS-D5000SPL

Notice PIONEER PRS-D5000SPL disponible gratuitement après inscription

Accédez à la notice du PIONEER PRS-D5000SPL en adhérant à la communauté.

Notice d’utilisation de votre PIONEER PRS-D5000SPL. La notice vous renseigne sur l’utilisation, donne des solutions aux problèmes d’entretien, de fonctionnement et d’assistance pour votre PRS-D5000SPL.

Notices - manuels - modes d'emploi disponibles pour PIONEER PRS-D5000SPL après inscription au groupe d'entraide

Aperçu de la notice

Extrait de la notice

see the “Connecting the Speaker wires”section. Grommet Battery wire (sold separately) For the wire size,see the “Connecting the Power Terminal” section. The battery wire,the ground wire and the optional direct ground wire must be same size. After making all other connections at the amplifier,connect the battery wire terminal of the amplifier to the positive (+) terminal of the battery. Ground wire (sold separately) The ground wires must be same size as the battery wire. Connect to metal body or chassis. Car stereo with RCA output jacks External Output (Subwoofer output) Connecting wire with RCA pin plugs(sold separately). RCA input jack Speaker terminal See the “Connecting the Speaker wires”section for speaker connection instruc- tions. System remote control wire (sold separately) Connect the male terminal of this wire to the system remote control termi- nal of the car stereo (SYSTEM REMOTE CONTROL). The female termi- nal can be connected to the auto-antenna relay control terminal. If the car stereo does not have a system remote control terminal,connect the male ter- minal to the power terminal through the ignition switch. Grommet Reverse side The maximum length of the wire between the fuse and the positive (+) terminal of the bat- tery is 45 cm (18 in.). Positive (+) terminal Negative (–) terminal Battery Optional direct ground wire (sold separately) When chassis ground- ing is not sufficient, direct grounding should be used. The wire size should be same size as the bat- tery wire. Fuse (150 A) Each amplifier must be SEPARATELY fused at 150 A. SYNC OUTPUT / SYNC INPUT jack See the “Connecting the Speaker wires”section for SYNC OUTPUT / SYNC INPUT jack con- nection instructions.Connecting the Unit Conne...

En cours...