Notice PIONEER S-3EX-W

Notice PIONEER S-3EX-W disponible gratuitement après inscription

Accédez à la notice du PIONEER S-3EX-W en adhérant à la communauté.

Notice d’utilisation de votre PIONEER S-3EX-W. La notice vous renseigne sur l’utilisation, donne des solutions aux problèmes d’entretien, de fonctionnement et d’assistance pour votre S-3EX-W.

Notices - manuels - modes d'emploi disponibles pour PIONEER S-3EX-W après inscription au groupe d'entraide

Aperçu de la notice

Extrait de la notice

Where To Place The Speaker Systems Placement within the listening room will have a great impact upon the total performance of the S-3EX speaker system in terms of bass performance, tonal accuracy, and imaging. All rooms are different and so this section is intended as a guide only. Experimentation in your room will yield optimum results. Use the graphic below as a guide to determine optimal speaker placement. . •In areas of high humidity, use a dehumidifier, and in areas of excessive dryness, use a humidifier to adjust the room’s humidity level. Avoid exposure to direct sunlight, and do not install in areas near by heating appliances. Listening position B30 cm to 60 cm30 cm to 60 cm 30 cm to 60 cm AA Speaker (right) Speaker (left) Distance "A" should be equal to or greater than distance "B." Each speaker should face the listening position. S-3EX_EN.book 7 ??? 2007?4?23? ??? ??5?12?8 En Connections Connecting to an amplifier This speaker does not include speaker cables used for connecting to an amplifier. Take the following factors into consideration when choosing speaker cables so that you can get the most from your speaker system: •Use heavy-gauge speaker cable if possible, and keep the cables to the minimum necessary length. •If the length of cable required for left and right speakers differs, use cables of the same length, matched to the longer distance. •Cables have differing characteristics. Keep this in mind when using any cable. •Select cables with as little resistance as possible, and make sure the cables to the speaker terminals and amp are firm and secure. Connecting the cables 1Switch off the power to your amplifier. 2Connect the speaker cables to the input terminals (lower) on the back of the speaker....

En cours...