Notice ROTEL RCD-1070 disponible gratuitement après inscription

Extrait de la notice

ou are going to be away from home for an extended period of time such as a month- long vacation, it is a sensible precaution to unplug your CD player (as well as other au- dio and video components) while you are away. Power Switch and Power Indicator The power switch is located on the front panel of your CD player. To turn the CD player on, push the switch in. The LED indicator above the switch and the Display will light up, indi- cating that the CD player is turned on. To turn the CD player off, push the button again and return it to the “out” position. Note: If you are using a switched outlet to turn on and off your CD player, you should leave the power switch in the “on” position. When AC power is applied to the unit, it will power up in fully active mode. Output Connections The RCD-1070 gives you a choice of two dif- ferent kinds of outputs – an analog output signal from the built-in D/A converter for use with conventional analog audio components and a coax digital output which provides an unprocessed digital signal for use with out- board D/A converters or digital processors. Note: To prevent loud noises that could damage your speakers, turn off all the sys- tem components when you make any sig- nal connections. Analog Outputs [See Figure 3 for wiring illustration] A pair of standard RCA jacks supplies an analog output signal from the RCD-1070 to the source inputs of an audio preamplifier, in- tegrated amplifier, or receiver. Select high quality audio interconnect cables. Connect the left and right channel outputs of the RCD-1070 to the corresponding inputs on the preamplifier or other component. Digital Output [See Figure 4 for wiring illustration] If you are using an outboard D/A converter or other digital processo...