Notice SHARP GS-XP9FGR

Notice SHARP GS-XP9FGR disponible gratuitement après inscription

Accédez à la notice du SHARP GS-XP9FGR en adhérant à la communauté.

Notice d’utilisation de votre SHARP GS-XP9FGR. La notice vous renseigne sur l’utilisation, donne des solutions aux problèmes d’entretien, de fonctionnement et d’assistance pour votre GS-XP9FGR.

Notices - manuels - modes d'emploi disponibles pour SHARP GS-XP9FGR après inscription au groupe d'entraide

Aperçu de la notice

Extrait de la notice

pressed to advanceor reverse the time display quickly. 3Press the SET/C button. •The colon (:) blinks to indicate that the clock is functioning. NOTE: •The current time cannot be set when the timer is operating. 1 2 3 Example: 5 o’clock in the afternoon ClockDisplay 12-hour modePM 5:00 24-hour mode17:00 SWING FAN MODE SET/C 1hSWING FAN MODE SET/C 1h Press the THERMOSTAT button to set thedesired temperature. •In the AUTO and DRYmodes, the tempera- ture can be changed in 1°C incrementswithin the range of 2°C higher to 2°C lower from the temperatureautomatically deter- mined by the air con- ditioner.•In the COOL and HEAT modes, the tempera- ture can be set within the range of 18 to 32°C 1 E-8 BASIC OPERATION 2Press the ON/OFF button to start opera-tion. •The red OPERATION lamp ( ) on the unit will light. 3 4 1 52 3 Press the MODE button to select the op-eration mode. AUTOHEATCOOLDRY 5 •In the DRY mode, the fan speed is preset toAUTO and cannot be changed. To turn off the unit, press the ON/OFF but-ton again. •The red OPERATION lamp ( ) on the unit will turn off. Press the FAN button to set the desired fanspeed.AUTOSOFTLOWHIGH (Example: 1°C higher) (Example: 2°C lower) 4 C C When using your air-conditioner with multi-system (GS-XPM9FGR,GS-XPM12FGR,GS-XPM18FGR) With a multi system air conditioner, multiple indoor units can be connected to one outdoorunit. When the setting mode differs among indoor unit(s), the indoor unit(s) operated later may not work.•When the indoor unit(s) is/are operating in HEAT mode, the remaining unit(s) can not operate inCOOL or DRY mode. •When the indoor unit(s) is/are operating in COOL or DRY mode, the remaining unit(s) can notoperate in HEAT mode.When the mode of the indoor unit(s) l...

En cours...